fcx619 da tasheet number: ds33067 rev. 7 - 2 1 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated 50v npn low saturation po wer transistor in sot89 features ? bv ceo > 50v ? i c = 3a high continuous collector current ? i cm up to 6a peak pulse current ? 2w power dissipation ? low saturation voltage v ce(sat) < 220mv @ 1a ? r ce(sat) = 87m? @ 2.75a for a low equivalent on-resistance ? h fe characterised up to 6a for high current gain hold-up ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot89 ? case material: molded plasti c, ?green? molding compound ? ul flammability rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n plated leads, solderable per mil-std-202, method 208 ? weight: 0.052 grams (approximate) applications ? load management functions ? motor control ? dc-dc / dc-ac converters ordering information (note 4) product marking reel size (inches) tape width (mm) quantity per reel fcx619ta 619 7 12 1,000 FCX619-13R 619 13 12 4,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http?//www.diodes.com /products/packages.html marking information top view sot89 device symbol top view pin-out 619 = product type marking code c e b c e c b 619
fcx619 da tasheet number: ds33067 rev. 7 - 2 2 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 7 v continuous collector current i c 3 a peak pulse current i cm 6 a continuous base current i b 500 ma thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5) p d 1 w (note 6) 2 thermal resistance, junction to ambient air (note 5) r ja 125 ? c/w ? (note 6) 62.5 thermal resistance, junction to leads (note 7) r jl 5.73 ? c/w ? operating and storage temperature range t j, t stg -55 to +150 ? c notes: 5. for a device surface mounted on 15mm x 15mm x 0.6mm fr4 pcb with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in steady state condition. 6. same as note (5), except the device is mounted on 40mm x 40mm x 1.6mm fr4 pcb. 7. thermal resistance from junction to solder-point (on the exposed collector pad). thermal characteristics and derating information 0 25 50 75 100 125 150 0.0 0.2 0.4 0.6 0.8 1.0 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 20 40 60 80 100 120 transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c pulse power dissipation pulse width (s) max power dissipation (w)
fcx619 da tasheet number: ds33067 rev. 7 - 2 3 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ. max unit test condition collector-base breakdown voltage bv cbo 50 190 ? v i c = 100a collector-emitter breakdown voltage (note 8) bv ceo 50 65 ? v i c = 10ma emitter-base breakdown voltage bv ebo 7 8.3 ? v i e = 100a collector cutoff current i cbo ? ? 100 na v cb = 40v emitter cutoff current i ebo ? ? 100 na v eb = 5.6v emitter cutoff current i ces ? ? 100 na v ces = 40v dc current transfer static ratio (note 8) h fe 200 300 200 100 ? 400 450 400 200 30 ? ? i c = 10ma, v ce = 2v i c = 200ma, v ce = 2v i c = 1a, v ce = 2v i c = 2a, v ce = 2v i c = 6a, v ce = 2v collector-emitter saturation voltage (note 8) v ce(sat) ? 13 150 190 240 25 220 260 320 v i c = 100ma, i b = 10ma i c = 1a, i b = 10ma i c = 2a, i b = 50ma i c = 2.75a, i b = 100ma base-emitter saturation voltage (note 8) v be ( sat ) ? 0.97 1.1 v i c = 2.75a, i b = 100ma base-emitter turn-on voltage (note 8) v be ( on ) ? 0.89 1.0 v i c = 2.75a, v ce = 2v transitional frequency f t 100 165 ? mhz i c = 50ma, v ce = 10v f = 100mhz output capacitance c obo ? 12 20 pf v cb = 10v, f = 1mhz, turn-on time t ( on ) ? 170 ? ns v cc =10v, i c =1a i b1 = -i b2 = 10ma turn-off time t ( off ) ? 750 ? ns note: 8. measured under pulsed conditions. pulse width 300 s. duty cycle 2%.
fcx619 da tasheet number: ds33067 rev. 7 - 2 4 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated typical electrical characteristics (@t a = +25c, unless otherwise specified.)
fcx619 da tasheet number: ds33067 rev. 7 - 2 5 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot89 dim min max a 1.40 1.60 b 0.44 0.62 b1 0.35 0.54 c 0.35 0.44 d 4.40 4.60 d1 1.62 1.83 e 2.29 2.60 e 1.50 typ h 3.94 4.25 h1 2.63 2.93 l 0.89 1.20 all dimensions in mm dimensions value (in mm) x 0.900 x1 1.733 x2 0.416 y 1.300 y1 4.600 y2 1.475 y3 0.950 y4 1.125 c 1.500 y1 x1 y2 y c x (3x) y3 y4 x2 (2x) e h d1 b1 b e c l a d 8 (4x) h 1 r 0 . 2 0 0
fcx619 da tasheet number: ds33067 rev. 7 - 2 6 of 6 www.diodes.com february 2013 ? diodes incorporated fc x 619 a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2013, diodes incorporated www.diodes.com
|
